FRITSCHI DIAMIR TECTON 13 BINDING

FRITSCHI DIAMIR
$1,299.00
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

FREE TOURING WITH POWER AND SAFETY

ALPINE PERFORMANCE IN ALL TERRAIN

The technology mix of the Tecton with pin unit in front, heel jaws and absolute power trans-mission for a perfect ride. The low weight, the easy step-in, the same level of safety as alpine bindings, as well as the practical handling make every tour a memorable experience.

Swiss made
All parts are manufactured in Switzerland and assembled into high-quality products in Reichenbach. After the assembly, every binding undergoes a meticulous quality control process, including a func-tional test.

DESCRIPTION:

POWER TRANSMISSION IN THREE DIMENSIONS

EASY AND PRECISE SKI CONTROL, EVEN WITH WIDER SKIS

In the back, where the forces are highest, the Tecton remains as stable and precise as an alpine binding. The hold-down system with a non-turning alpine heel jaw and the rail transmits the power directly from the boot to the ski without any loss.

·      HOLD-DOWN SYSTEM WITH ALPINE HEEL - The heel jaw is pressing the sole of the boot firmly against the heel plate, which is directly connected with the ski, and provides consistent direct traction.

·      ALPINE HEEL WITH RAIL - The boot remains fixed. As an absolute novelty, the rail engages in the back of the boot, secures it in the center and prevents a loss of power.

·      SOLID, NON-TURNING HEEL - Heel unit remains laterally stable. Unlike other pin bindings, the power flow is not interrupted by a rotating movement when the skis turn.

SAFETY THROUGH AND THROUGH

MINIMIZING THE RISK OF INJURY

The Tecton equals both the performance and the safety of alpine bindings. Any unwanted release is prevented by the high elasticity. The binding reliably releases at the DIN setting.

·      ELASTICITY OF 13 MM - The highest elasticity of 13 mm prevents an unwanted release and cushions any lateral impact so that the ski always maintains a firm grip. Lateral release where it belongs for optimal performance. The pin binding with lateral release and DIN setting at the toe, where the lateral forces are acting in the event of a fall.

·      FRONT RELEASE AT THE HEEL WITH 9 MM ELASTICITY - As in alpine bindings, when the DIN value is set, the front release occurs via a heel jaw with a dynamic way of 9 mm. The reset force of the spring prevents a pre-release and compensates the high tensile forces on the leg in a forward fall.

·      RELEASE LEVER - After the release of the heel, the boot tips forward. Due to the pressure of the front of the boot on the Release Lever, the boot is also immediately released by the toe unit.

·      EMERGENCY RELEASE WHEN CLIMBING - Solid support while climbing and safety in an emergency. The boot is fixed and held in the middle, but the binding will release in response to high active forces.

·      Clamping systems must be blocked while climbing to ensure stability.

SAFETY IS WELL SERVED

COMFORT IS NOT A LUXURY IN SKI TOURING

The easy step-in and the intuitive control of the Tecton provide security, especially in challenging terrain.

·      SOLID STOP IN FRONT TO STEP IN - Easy step-in. The tip of the boot is optimally positioned by means of a solid stop in front and a positioning guide. Responding to slight pressure, the system closes with the pin levers engaging precisely in the inserts.

·      The sequence of movements is comparable with that of an alpine binding.

·      EASY OPERATION MEANS MORE THAN COMFORT - Switching from downhill to uphill mode and vice versa is very simple without having to step out of the binding. The three ergonomically walk mode levels can also be changed in no time with a pole.

FEATURES:

SAFETY AND COMFORT!

·      Alpine heel with Rail

·      Lateral release at the toe with DIN setting and 13 mm elasticity

·      Frontal release at the heel with 9 mm elasticity

·      New easy step-in

·      Complete easy handling package

COLOR CLIPS

Customized according to each skier’s personal taste

The design is a mixture of power and finesse and underscores the performance of the light-weight construction. With the replaceable Color Clips the binding can be matched to the color of the skis or the boots according to the skier’s personal taste

SPECIFICATIONS:

This is how much power, safety and comfort weigh in free touring.

The right mix of light high-tech synthetics and high-quality metal alloys provides superior stability at a low weight.

DIN

5 – 13

Ski width

> 70 mm

Weight

550 g / unit without ski brake

Ski brakes*

90 / 100 / 110 / 120 mm
80 g / unit

Subject to technical changes
* Options standard ski brakes for ski widths